繁體中文
Description : Stamped steel case ep. 20/10 th. Trunk of 75 x 130 mm, axis at 45 mm. Standard rods allowing a door condemnation from 1.65 m to 2.25 m. Inner mechanism type square allowing the maneuver of the 1/2 turn with the key, inside and outside. Deadbolt and 1/2 turn in solid brass. Steel high and low bolts Ø 16 mm on flat steel rods allowing a very precise adjustment to the desired length and requiring no cutting. High strength square striker. Rod covers, guides and bolt strikers high and bottom in steel leaving no fixing screws. Cylinder hubcap on the inner side.? Square?7?mm. Simple handle provided for clutter lock. The mounting of the lock does not require specific serration of the doorOptions: Set of high-rise rods allowing locking up to 3 m. DOUBLE BELUGA crutch. Hinge guards. Rod kit. Specific protective equipmentLock reinforcement plate. 2 pins made of hardened steel in the deadbolt for protection against sawing. Steel protective cabochon against cylinder spitting. 2 cylinder drilling protection pins (stator / rotor) and first 3 hardened steel pins. Profile cylinder TRANSIT 2Engine with standardized European profile in brass 30 x 65 mm for door of 45 mm max. 8-pin mechanism protected against hooking. Anti-tear sintered steel panel. Protection against piercing by needle and pin in hardened steel. 4 reversible flat keys in nickel-plated brass with property card. Possibility of sending on request. Finish: Epoxy brown or white Version: Right or left. A draw or a clutter. Usage:
